Multinautic, QP-400, 3-Sections, 4 ft. x 8 ft. Aluminum Stationary Dock with Cedar Decking

This Multinautic Ensemble based on the 4 ft. x 8 ft. Aluminum Stationary Dock, model QP-400, with Cedar Decking, is designed to be installed in up to 4 ft. of water depth. If the weight of your boat doesn't require a floating dock, you'll appreciate the stability of a Stationary Dock at all times. Waves won't bother you while you're relaxing or grabbing a bite. <p>The dock comes with all the necessary hardware to assemble and join 2 docks end to end, side by side or in an "L" shape. It can handle up to 1200 lbs per dock section, the best capacity on the market for a lightweight stationary dock. Adjustable in height at dock level, it provides easy access for small boats low-lying craft such as kayaks, canoes, and paddleboards. Aluminum and cedar are lightweight materials making the dock easy to handle and install while ensuring remarkable strength. </p>For nearly 20 years, with only 5 parts to assemble, the Multinautic's QP-400 has been referred to as the Original Ultralight, and continues to deliver on its promise.

• Lightweight: Since a dock on posts must be removed from the water for the winter due to spring ice movements, the design combines lightness and strength
• For nautical fun: Adjustable in height, it provides easy access for small boats low-lying craft such as kayaks, canoes, and paddleboards and can be leveled to seasonal water fluctuations
• Complete DIY Kit: Easy assembly with the included 1-in thick  (usually referred as 5/4"), kiln-dried, red Western cedar boards and the supplied screws. Western Cedar is naturally resistant to mold and insects so no treatment or maintenance is necessary
• Exceptional durability: This dock can handle up to 1200 lbs, the best capacity on the market for a lightweight stationary dock. The structure is designed to withstand the elements and harsh conditions, making it a sound long-term investment.
• Neat finish: The ends of the planks are concealed in the side walls for a clean finish. Assembled from below, the result is a decking with no visible screw heads.
• The dock comes with all the necessary hardware to assemble and join 2 docks end to end, side by side or in an "L" shape
• The kit includes: one 48" Central Support, two 48" End Pieces, two 96" Dock Side Extrusions, 2 Galvanized Steel 6" x 6" Base Plates, two 6' Leg Piles, 2 PVC Pile caps, 2 Junction Plates, 1 lateral and corner adapter, 1 parallel adapter, 8 s.s. bolts 1" x 1/2", 24 s.s. bolts, nuts and lock washers
• Made with 6005-T5 Aluminum, this dock is designed for freshwater installation.
• The base plate has a central hole that allows the post to be anchored by driving it into the lakebed, while the steel plate prevents the post from sinking further. The dock is leveled by adjusting the posts using the sturdy 1/2” diameter stainless steel bolts located at the corners of the dock.